Hygropin Moisture Meter

Hygropin Moisture Meter

Concrete, Materials, Components

Moisture Meter - Hygropin

Moisture Meter - Hygropin
Moisture Meter - Hygropin

Excess moisture in concrete can be fatal to a floor covering installation. To prevent mildew and major damage, the flooring industry requires smart solutions to check surfaces for moisture prior to installing floor coverings or coatings. The Hygropin moisture meter offers the perfect solution to identify and monitor moisture in concrete.
Due to the small and fast sensor of the moisture meter, diagnosing moisture according to ASTM F2170-09 is quicker and easier than ever before. The relative humidity test requires placing a measuring sleeve at a specific depth. This can be done either by drilling a hole or by pre-installing cast holes in fresh concrete. This moisture meter provides the smallest available sensor on the market, minimizing damage to the surface and reducing the installation efforts immensely.

Features

  • Depending on the settings this moisture meter is able to display relative humidity, temperature and calculated psychrometric parameters
  • Fast measuring time
  • Highly integrated sensor with only 5 mm / 0.3” diameter
  • Moisture meter shows trend indicators for each parameter
  • The two independent sensors channels of the moisture meter can measure ambient and concrete characteristics simultaneously

Applications

The moisture meter Hygropin can be used in dry as well as in fresh concrete.

  • Drilling an 8 mm hole in the concrete is enough for placing a measuring sleeve
  • The add-on for wet concrete allows pre-installation of measuring sleeves as cast holes in fresh concrete.

Standardization

The following standards can be applied to the moisture meter:

  • CE / EMC immunity
  • EMC Directive 2004/108/EG
  • EN 61000-6-1 / 6-2 / 6-3 / 6-4
  • ASTM F2170-09

Technical Data

Display Unit of the Moisture Meter
Battery9 V alkaline or accumulator
MainsVia USB
Probe inputTwo separate inputs
Real time ClockYes
Psychrometric CalculationsYes
Interface typeUSB
MemoryMax.10’000 readings
Logging interval5 s to 1 h
DisplayPixel graphic LCD, backlighted
Display modes% RH and temperature, date and time
% RH, temperature, calculated parameter
Dimension270 x 70 x 30 mm
(10.63 x 2.76 x 1.17”)
IP classificationIP 40
In-situ probe of the Moisture Meter
Measuring range0 to 100% RH
- 40 °C to 85 °C (-40 °F to 185 °F)
Accuracy± 1.5 % RH / ± 0.3 K
DimensionØ 5 mm (Ø 0.2”)
Cable length200 cm (79”)
Hygropin Moisture Meter
DYWIDAG-Systems International GmbH

use our contact form